Search:
  Quote Basket  |  Sitemap  |  Imprint
  • Deutsch
  • English

DSCA40

Analog Voltage Input Signal Conditioners, Bandwidth 3 Hz

Each DSCA40 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level voltage output. Signal filtering is accomplished with a five-pole filter. An anti-aliasing pole is located on the field side of the isolation barrier, and the other four poles are on the system side. After the initial field-side filtering, the input signal is chopped by a proprietary chopper circuit. Isolation is provided by transformer coupling, again using a proprietary technique to suppress transmission of common mode spikes or surges.

Module output is either voltage or current. For current output models a dedicated loop supply is provided at terminal 3 (+OUT) with loop return located at terminal 4 (-OUT). The system-side load may be either floating or grounded.

Special input circuits provide protection against accidental connection of power-line voltages up to 240 VAC and against transient events as defined by ANSI/IEEE C37.90.1. Protection circuits are also present on the signal output and power input terminals to guard against transient events and power reversal. Signal and power lines are secured to the module using screw terminals which are in pluggable terminal blocks for ease of system assembly and reconfiguration.

The modules have excellent stability over time and do not require recalibration, however, zero and span settings are adjustable up to ± 5% to accommodate situations where fine-tuning is desired. The adjustments are made using potentiometers located under the front panel label and are non-interactive for ease of use.

Circuit diagram Dataforth DSCA40

Block Diagram DSCA40



PDF Downloads:


9 Modules for Type DSCA40:

ModuleInputDescription
DSCA40-01 -10 mV to +10 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-02 -50 mV to +50 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-03 -100 mV to +100 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-04 -10 mV to +10 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-05 -50 mV to +50 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-06 -100 mV to +100 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-07 0 mV to +10 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-08 0 mV to +50 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out
DSCA40-09 0 mV to +100 mV DSCA40 Isolated Analog Voltage Input Signal Conditioner, Wide Bandwidth, with Voltage-Input and Voltage- or Current-Out

Specifications

top
  • Input: mV-Signal
  • Output: 0V…10V / - 10V…+ 10V / 0mA…20mA / 4mA…20mA
  • Bandwidth 3 kHz
  • Isolation 1500 Vrms
  • Input protection 240 Vrms
  • Input Resistance 50 MOhm
  • Accuracy ± 0.03%
  • Linearity ± 0.01%
  • ANSI/IEEE C37.90.1 Input protection
  • CMR 100dB
  • True 3-way isolation
  • NMR: 100dB / Decade > 3 kHz
  • Power Supply 15 to 30 VDC
  • Operating Temperature Range -40°C … +80°C
  • Adjustability of +/-5 % Zero and span
  • 5-pol. Filtering
  • Dimensions 75 x 22.5 x 105 mm
  • DIN Rail Mounting
  • CE and ATEX certified, C-UL-US compliant
  • Special Solutions on request