Search:
  Quote Basket  |  Sitemap  |  Imprint
  • Deutsch
  • English

SCM7B36

Potentiometer Input Modules with Voltage-Output, Bandwidth 3 Hz

Each SCM7B36 Potentiometer input module provides a single channel of resistance input which is filtered, isolated, amplified, and converted to a high-level analog voltage output.

The SCM7B36 module interfaces to slidewires and potentiometers in both two or three wire configuration and incorporates a five-pole filtering approach to maximize both time and frequency response by taking advantage of both Bessel and Butterworth characteristics. One pole of the filter is on the field side of the isolation barrier; four are on the process control system side. In the 3-Wire configuration, lead resistance compensation is provided if the resistance of the “x” lead is closely equivalent to that of the “+” lead. Internal to the module, measurement error due to lead resistance is canceled.

In response to the low-level current excitation, and after initial field-side filtering, the input signal is chopped by a proprietary chopper circuit and transferred across the transformer isolation barrier, suppressing transmission of common mode spikes and surges. The signal is then reconstructed and filtered for process control system output.

Six standard input resistance ranges are offered, from 100 Ω to 10 kΩ, with three output ranges available: 0-5 V, 1-5 V, and 0-10 V. Modules accept a wide 14- 35 VDC power supply range (+ 24 VDC nominal). Their compact packages (2.13" x 1.705" x 0.605" max.) save space and are ideal for high channel density applications. They are designed for easy DIN rail mounting using any of Dataforth’s “-DIN” backpanels.

Circuit diagram Dataforth SCM7B36

Block Diagram SCM7B36



PDF Downloads:


6 Modules for Type SCM7B36:

ModuleInputDescription
SCM7B36-01 0 to 100 Ohm SCM7B36 Isolated Potentiometer Input Module with Voltage-Output
SCM7B36-06 0 to 10 kOhm SCM7B36 Isolated Potentiometer Input Module with Voltage-Output
SCM7B36-05 0 to 5 kOhm SCM7B36 Isolated Potentiometer Input Module with Voltage-Output
SCM7B36-04 0 to 1 kOhm SCM7B36 Isolated Potentiometer Input Module with Voltage-Output
SCM7B36-03 0 to 500 Ohm SCM7B36 Isolated Potentiometer Input Module with Voltage-Output
SCM7B36-02 0 to 200 Ohm SCM7B36 Isolated Potentiometer Input Module with Voltage-Output

Specifications

top
  • Input: Potentiometer up to 10 kOhm
  • Output: 1 V … 5 V / 0 V … 5 V / 0 V … 10 V
  • Bandwidth 3 Hz
  • Isolation 1500 Vrms
  • Input protection 120 Vrms
  • Accuracy ± 0.03% (typ.), ± 0.1% (max.)
  • Linearity ± 0.01% (typ.), ± 0.02% (max.)
  • ANSI/IEEE C37.90.1 Input protection
  • CMR 120dB
  • True 2-way isolation
  • NMR: 80/85dB at 50/60Hz
  • Power Supply 14 to 35 VDC
  • Operating Temperature Range -40°C … +85°C
  • Mix and Match Types on Backpanels possible
  • Dimensions 54.1 x 43.3 x 15.4 mm
  • Optional DIN Rail Mounting
  • CSA certified, CE and ATEX compliant
  • Wide range of accessories
  • Special Solutions on request